D&T Workshop - Wood Tools 1

Gap-fill exercise

Fill in all the gaps, then press "Check" to check your answers. Use the "Hint" button to get a free letter if an answer is giving you trouble. You can also click on the "[?]" button to get a clue. Note that you will lose points if you ask for hints or clues!
In D&T workshop, different marking out tools may be used to mark out different materials
• A to mark lines on metals
• A to mark lines on wood
• A on bare plastics

and a are used to mark lines a right angels to a datum edge on metals

A and a are used to mark lines at right angles to a face side or face edge on wood

A with a are used to cut a line across the grain of a piece of wood where a section of the wood needs to be removed

Marking lines parallel to an edge using is used to mark lines parallel to the datum edge on metals and plastics

A is used to mark lines parallel to a face side or face edge on wood

Marking lines at an angle to an edge using a

Marking curves, arcs and circles
• a pair of is used to mark circle or arcs on metals
• a is used to mark arcs or circles on wood or plastics

Marking freeform shapes
• a is used to mark out a freeform shape. It may be cut from card or paper.


Leading Cloud Surveillance, Recording and Storage service; IP camera live viewing

Leading Enterprise Cloud IT Service; cloud file server, FTP Hosting, Online Storage, Backup and Sharing

Powered by FirstCloudIT.com, a division of DriveHQ, the leading Cloud IT and Cloud Surveillance Service provider since 2003.